HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 158)

Creating a stored copy job
Turning on the job storage setting indicates that you want the copy job to be stored on the hard disk,
and that you will print the job later. You must provide the following information to create a stored job:
1. Touch COPY SETTINGS .
2. Select your basic copy settings (see Copying by using user-defined settings ).
3. Touch the Advanced... tab.
4. At the Job Storage box, select ON. A popup dialog box is displayed, asking for the USER
NAME, and JOB NAME. If AUTHENTICATION REQUIRED is selected, a Personal Identification
Number (PIN), if required. To enter the PIN, touch the small box next to AUTHENTICATION
REQUIRED. The keyboard is displayed when you select USER NAME and JOB NAME. The PIN
is a four-digit number that can be typed on the numeric keypad.
5. Type the User Name.
6. Type the Job Name.
7. Type the PIN, if required.
8. Touch OK .
9. Press Start .
See Printing stored jobs for information on printing a stored job.
138 Chapter 5 Copying ENWW