ATEN CN-5000 User Manual
Page 102
Method 3: (For a DHCP address)
For computers running Windows, the CN-5000’s DHCP generated IP
address can be determined with the AdminTool utility (found on the
distribution CD):
1. Double click the AdminTool utility icon on the CD to install the utility on
your computer.
When the installation completes, there is a CN5000 AdminTool icon on
your desktop.
2. Double click the CN5000 AdminTool icon.
The utility searches the network segment for CN-5000 devices, and
displays what it finds in a dialog box similar to the one below:
The DHCP assigned IP address appears in the right hand column of the
CN5000 Devices panel:
Note: 1. If there is more than one device in the list, use the MAC address
to pick the one you want. The CN-5000’s MAC address is
located on its bottom panel.
2. If the list is empty, or your device doesn’t appear, click Refresh
to refresh the Device List.
3. Click Exit to close the utility.
2005-09-13
CN-5000 User Manual
90