ATEN CN-5000 User Manual
Page 68
IP Address:
w
The CN-5000 can either have its IP address assigned dynamically at
bootup (DHCP), or it can be given a fixed IP address.
§
For dynamic IP address assignment, select the Obtain an IP address
automatically, radio button.
§
To specify a fixed IP address, select the Set IP address manually,
radio button and fill in the required information.
Note:
A fixed IP address can also be assigned with the ARP
command as follows:
arp -s <ip address> <CN-5000’s MAC address>
For example,
arp -s 10.0.0.10 00-48-54-65-00-01
assigns an IP address of 10.0.0.10 to a CN5000 with a MAC
address of 00-48-54-65-00-01.
w
The CN-5000 can either have its DNS address assigned automatically, or
a fixed address can be specified.
§
For automatic address assignment, select the Obtain DNS server
address automatically, radio button.
§
To specify a fixed address, select the Use the following DNS server
address, radio button and fill in the required information.
Log Server:
Important transactions that occur on the CN-5000, such as logins and internal
status messages, are kept in an automatically generated log file. Specify the
MAC address and a Port number for the server you want the log file to reside
on in the Log Server section. The Log Server is discussed in detail on p 77.
Note: The Log Server port number must be different from the port numbers
that were specified for Program and Java in the Access Ports section.
2005-09-13
CN-5000 User Manual
56