ATEN CN-5000 - Manual (Page 20)

2. Screw the bracket into any convenient location on the rack.
Note: These screws are not provided. We recommend that you use M5 x 12
Phillips Type I cross, recessed type screws.
Cable Information
Only custom cable sets specifically designed to work with the CN-5000 may
be used to link to your server or KVM switch. A 1.8 m custom cable set is
provided with this package. Cable sets are also available in other lengths, as
shown in the table below.
Length (m) Part Number
1.2
1.8
3.0
6.0 2L-5201P
2L-5202P
2L-5203P
2L-5206P
If you wish to purchase additional cables, contact your dealer.
2005-09-13
CN-5000 User Manual
8