ATEN CN-5000 - Manual (Page 87)

3. Key in the serial number - 5 characters per box - then Click OK. (If you
don’t know what the number is, contact the CN-5000 administrator.)
An Address Input dialog box appears:
4. Key in the IP address for the unit you want to connect to - including a
forward slash followed by the name of the CN-5000’s Default Java
Program Name (see p. 19). For example:
168.10.95.1/abcdefg
Note: For security purposes, the Default Java Program Name must be
specified correctly as part of the IP address. The system
administrator may change the name from time to time to thwart
unauthorized access attempts. Be sure you have the correct name
when you attempt to connect.
After you establish a connection, a Login dialog box appears:
2005-09-13
8. AP Operation
75