ATEN CN-5000 - Manual (Page 82)

The Tools Menu
Tools menu operations are performed after you connect, but before you
switch to remote view. There are two entries on the Tools Menu: Keyboard
and Config. They are explained in the sections that follow.
Keyboard
Various configuration actions related to the keyboard, video, and mouse can
be performed via hotkey combinations. The Hotkey Setup utility is accessed
by opening the Tools menu and selecting Keyboard. The Hotkey Setup
Screen appears:
This is essentially the same dialog box discussed in the browser-based
Windows Client chapter. Refer back to p. 34 for details.
2005-09-13
CN-5000 User Manual
70