ATEN CN-5000 User Manual
Page 32
Filtering
There are a maximum of 100 filters allowed for each category: User IPs;
User MACs; and Administrator MACs. User Station filtered items (IPs and
MACs) can be specified as included or excluded by highlighting the item and
clicking the include or exclude radio button.
w
If the include button is checked, all the addresses within the filter range
are allowed access to the CN-5000; all other addresses are denied access.
w
If the exclude button is checked, all the addresses within the filter range
are denied access to the CN-5000; all other addresses are allowed access.
User Station Filtering - IPs:
To enable IP filtering for User Stations, Click to put a check mark in the IP
Filter enable checkbox.
To add a filter:
1. Select whether to include or exclude the filter.
2. Click Add. A dialog box similar to the one below appears:
3. Specify the filter address in the dialog box, then Click OK.
Each IP filter can consist of a single address, or a range of addresses.
Therefore, a second dialog box similar to the one below appears:
2005-09-13
CN-5000 User Manual
20