ATEN CN-5000 - Manual (Page 79)

Starting Up
To bring up the Windows Client Main Screen, Double Click the CN5K
Client icon, or key in the full path to the program on the command line.
If this is the first time that you are running the program, a dialog box appears
requesting you to input your serial number:
If you don’t know what it is, contact the CN-5000 administrator. Key in the
serial number - 5 characters per box - then Click OK.
Note: You must have DirectX 7.0 or higher installed on your computer. If
not, the Client program will not load.
The Connection Screen
When the Windows Client starts, a Connection Screen, similar to the one
below, appears:
2005-09-13
8. AP Operation
67