ATEN CN-5000 - Manual (Page 19)

Before You Begin
Rack Mounting
For convenience and flexibility, the CN-5000 can be mounted on a system
rack. To rack mount the unit do the following:
1. Using the screws provided with this package, screw the mounting bracket
into the top or bottom of the unit as shown in the diagram below.
1. Important safety information regarding the placement of this
device is provided on p. . Please review it before proceeding.
2. Make sure that power to any devices you will be connecting up
have been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
Phillips hex head
M3 x 8
2005-09-13
2. Hardware Setup
7