ATEN CN-5000 - Manual (Page 77)

3. Click Open.
You return to the Customization page with the path to the file, and the
Upload version number displayed.
Note: If you select the wrong file type for the component you are
upgrading an Invalid file type message appears when you click
Open. Go back and select the correct file type.
4. Enable the Reset on exit checkbox.
5. Click OK to save your settings and reset the CN-5000. Following the
reset, wait approximately 30 to 60 seconds before logging back in to the
Administrator Utility.
2005-09-13
8. AP Operation
65