ATEN CN-5000 - Manual (Page 84)

Connecting
To connect to a CN-5000 unit:
1. If it is in the CN5000 List, Double Click it; if you are using the CN5000
IP input box, specify the IP address and Port number, then Click Open. A
Login dialog box appears:
2. Key in a valid Username and Password, then click OK.
The program attempts to contact your selected CN-5000 unit. While it
does so, you can check the Message List window for status messages
regarding the operation’s progress.
3. Once contact with the CN-5000 has been established, the Switch to
Remote View button becomes active.
Click it to connect to the CN-5000 and take over console control of the
unit that is connected to it.
2005-09-13
CN-5000 User Manual
72