Agilent Technologies N8201A - Manual (Page 108)

104 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
6 Service, Support, and Safety Information
Safety and Regulatory Information
EMC
Complies with European EMC Directive 89/336/EEC, amended by 93/68/EEC
• IEC/EN 61326
• CISPR Pub 11 Group 1, Class A
• AS/NZS CISPR 11:2002
• ICES/NMB-001
Complies with Canadian EMC Requirements
This ISM device complies with Canadian ICES- 001
Cet appareil ISM est conforme a la norme NMB du Canada.
Safety
Complies with European Low Voltage Directive 73/23/EEC, amended by 93/68/EEC
• IEC/EN 61010-1
• Canada: CSA C22.2 No. 61010-1
• USA: UL 61010-1
Safety Summary
The following general safety precautions must be observed during all phases of operation
of this instrument or system. Failure to comply with these precautions or with specific
warnings elsewhere in this manual violates safety standards of design, manufacture, and
intended use of this instrument or system. Agilent Technologies, Inc. assumes no liability
for the customer’s failure to comply with these requirements.
General
This product has been designed and tested in accordance with the standards listed on the
Manufacturer’s Declaration of Conformity, and has been supplied in a safe condition. The
documentation contains information and warnings that must be followed by the user to
ensure safe operation and to maintain the product in a safe condition. Contact your Agilent
sales representative to obtain a copy of the Declaration of Conformity. Alternately, contact
Agilent via:
www.Agilent.com.
Compliance with German Noise Requirements
This is to declare that this instrument is in conformance with the German Regulation on
Noise Declaration for Machines (Laermangabe nach der Maschinenlaermrerordnung
-3.GSGV Deutschland.)