Agilent Technologies N8201A - Manual (Page 42)

38 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2 Hardware Setup and Configuration
The Remote GPIB interface dialog box should look similar to the following:
6 Select IP address and enter the IP Address of the N8201A performance downconverter
in the Remote GPIB Interface dialog box.
7 Enter gpib7 for the Interface Name on Remote Host.
8 Click Test connection. If the connection was successful, text stating “The interface was
successfully opened“ should appear.
9 Click OK.