Agilent Technologies N8201A - Manual (Page 36)

32 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2 Hardware Setup and Configuration
Step 3. Verify Connection with Synthetic Instrument Finder
Agilent supplies a program named the Synthetic Instrument Finder that enables
connection between a PC and instruments that are connected on a LAN [Local Area
Network].
1 From the Windows Desktop,
click Start > All Programs > Agilent SI Tools > Synthetic Instrument Finder.
The Synthetic Instrument Finder should appear and look similar to the following.
2 Select an instrument, from the left-hand pane of the Synthetic Instrument Finder, and
right-click on an instrument with the mouse.