Agilent Technologies N8201A - Manual (Page 39)

Hardware Setup and Configuration 2
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 35
This section describes how to access and use the Agilent N8201A Option H02
Spectrum Analyzer GUI.
1 From the Windows Desktop, click
Start > All Programs > Agilent SI Tools > N8201A Option H02 Spectrum Analyzer GUI.
2 Click File > Connect (upper-left corner)
on the Agilent N8201A Option H02 Spectrum Analyzer GUI.
3 Enter the VISA Address (for example, TCPIP0::141.121.87.18::inst0::instr) of the
instrument being connected to and click OK.
• If you don’t know the IP address of the instrument, that is used as part of the
VISA Address connection string, refer to the Default IP Address that is displayed
when verifying connection with the Synthetic Instrument Finder. (Refer to
“Step 3.
Verify Connection with Synthetic Instrument Finder" on page 32.)
The Agilent N8201A Option H02 Spectrum Analyzer GUI controls the N8201A performance
downconverter that is equipped with Option H02 and simulates the functionality of an
Agilent PSA spectrum analyzer. To learn how to use the controls of this GUI interface, refer
to the PSA documentation.
PSA documentation is available from the Agilent N8201A Performance Downconverter
Synthetic Instrument Module, 3 Hz to 26.5 GHz, Instrument Drivers and Documentation CD
(refer to
“Installing Software and Instrument Drivers" on page 6) or from the Web at:
http://www.agilent.com/find/psa