Agilent Technologies N8201A - Manual (Page 40)

36 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2 Hardware Setup and Configuration
(Optional) Step 5. Connect to an SA Remote Web Server
1 From the Windows Desktop,
select Start > All Programs > Agilent I/O Libraries Suite > Agilent Connection Expert.
2 Click Add Interface.
N O T E
If Option H02 is not installed, the SA Remote Web Server software cannot be used!
In addition to Option H02, you must have installed the Microsoft Virtual Machine (VM), the
Apache HTTP Server, and the SA Remote Web Server software; this interface can be
installed along with the Agilent N8201A Option H02 Spectrum Analyzer GUI, but only one
interface can be used at any given time. (For further software installation information, refer
to
“Installing Optional Software and Instrument Drivers" on page 16.)
The N8201A performance downconverter can be manually controlled on instruments
without Option H02 by using the Agilent Synthetic Instrument GUI.
(Refer to “Starting the Agilent Synthetic Instrument GUI" on page 67.)