Agilent Technologies N8201A - Manual (Page 38)

34 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2 Hardware Setup and Configuration
(Optional) Step 4. Connect to the Agilent N8201A Option H02
Spectrum Analyzer GUI
N O T E
If Option H02 is not installed, the Agilent N8201A Option H02 Spectrum Analyzer GUI
software cannot be used!
In addition to Option H02, you must have performed “(Optional) Step 8. Install the Agilent
N8201A Option H02 Spectrum Analyzer GUI" on page 17; this interface can be installed
along with the SA Web Remote Server, but only one interface can be used at any given time.
(For further software installation information, refer to
“Installing Optional Software and
Instrument Drivers" on page 16.)
The N8201A performance downconverter can be manually controlled on instruments
without Option H02 by using the Agilent Synthetic Instrument GUI.
(Refer to “Starting the Agilent Synthetic Instrument GUI" on page 67.)