Agilent Technologies N8201A - Manual (Page 113)

Service, Support, and Safety Information 6
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 109
Table 6 Safety symbols and instrument markings
Safety symbols Definition
Warning: risk of electric shock.
Warning: hot surface.
Caution: refer to instrument documentation.
The CE mark is a registered trademark of the European
Community.
The CSA mark is a registered trademark of the
CSA-International. This instrument is in compliance with
CSA 1010 Edition 2.
The C-tick mark is a registered trademark of the Spectrum
Management Agency of Australia. This signifies compliance
with the Australian EMC Framework regulations under the
terms of the Radio Communications Act of 1992.
This symbol indicates separate collection for electrical and
electronic equipment, mandated under EU law as of August 13,
2005. All electric and electronic equipment are required to be
separated from normal waste for disposal
(Reference WEEE Directive, 200/96/EC). Do not throw
batteries away, but collect as small chemical waste.
ISM 1-A This text indicates that the instrument is an Industrial Scientific
and Medical Group 1 Class A product (CISPER 11, Clause 4).
ICES/NMB-001 This text indicates product compliance with the Canadian
Interference-Causing Equipment Standard (ICES-001).
Laser radiation symbol: marked on products that have a laser
output.
Alternating current.
Both direct and alternating current.
Three-phase alternating current.
Earth (ground) terminal.
Protective earth (ground) terminal.
N10149