Agilent Technologies N8201A User Manual
Page 44
40
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2
Hardware Setup and Configuration
16
From the command window prompt, type ipconfig to get the IP Address of your
computer.
17
Write down your computer's IP address.
IP Address: __ __ __ . __ __ __ . __ __ __ . __ __ __
This IP address is needed in the following steps.
If you are attempting to access the web server from another machine, you need to make
sure to use the hostname or IP Address of the adapter that is on the same network as
the machine you are using. (In regards to the example above, if you are trying to access
the webpage from a machine on the network that is connected to the adapter with the
169.254.241.150 address, you need to use 169.254.241.150 and not 141.121.83.141 as the
IP Address.)