Vaisala viewLinc 4.3 User Manual
Page 107
Viewing Devices and Hosts
viewLinc 4.3
4
|
4
99
For HMT140 Wi-Fi Data Loggers you can also specify:
•
Timeout
: Number of Seconds to wait for a data transmission
before failing the ‘Add’ operation.
•
UDP Port
: Auto-generated, can be modified if required.
•
Password:
Change the assigned password, if using.
•
Max Blocks per Beacon
: Specify the maximum size per-
mitted for historical data retrieval. Entering a lower number
helps to conserve battery life.
•
Do not change the ‘Max blocks per beacon’ value for HMT140
Devices without first consulting your technical support depart-
ment as changes to this setting may impact battery life.
•
Retry Count:
Number of times data transmission is attemp-
ted by the Device if it fails to receive an acknowledgement.
•
Transmit Period:
The frequency of data transmissions.
•
Sample Rate
: The frequency that data samples are saved to
the Device.
5
Click OK to save.