Vaisala viewLinc 4.3 - Manual (Page 94)

Working with the Locations window
86 4 | 4 M211679EN-A
2 On the Access Control tab select the View, then select
Options | Add . The Create Access Control window appears.
3 Specify the access control type, User or Group, the name of the
User or Group, and select the permission you wish to give:
• Hide : Use this permission for exceptions.
• View : User or Group can see this Location in the Loca-
tions window.
• Full Control : User or Group can modify the View using
the Views Manager window.
4 Click Save . The new permission appears in the Access Con-
trol tab. When selected, access to the view is provided with ‘Full
Permission’ by default.
Note: To share this View with multiple Users who are not in the
same Group, you can either create a new Group and assign
specific Users to the Group, or complete steps 1 through 4
for each specific User.
Working with the Locations
window
All viewLinc Users have access to the Locations window; however,
Locations that a User can view differ depending on the Locations the
User or Group is permitted to view. Permissions are assigned by the
viewLinc Administrator (see “Controlling Access to viewLinc” on
page 35).
As described in the “viewLinc Desktop Orientation” on page 63, the
Locations window contains a navigation pane and four tabs with
various options and control buttons to help you customize, manage
and display data.
Searching for Zones and Locations
For some Users, the list of Locations they can view is long, and
finding a specific Location may be time-consuming. Using the