Setting up devices – Vaisala viewLinc 4.3 User Manual
Page 178
Setting Up Devices
170
4
|
4
M211679EN-A
Q:
How do I configure a firewall for viewLinc?
A:
viewLinc will have exceptions added in the Domain and Private
networks. Exceptions will not be added to Public networks. If this is
required, they must be added manually. Please contact Vaisala
Technical Support if you require assistance.
Setting Up Devices
Q:
My network uses a combination of Vaisala Veriteq
Devices, 300 Series and HMT140 Wi-Fi Data Loggers. How
can I add them quickly?
A:
To add multiple Transmitters or a combination of Devices and
Transmitters at one time, create a .txt definitions file with one
Device or Transmitter defined per line. Add fields to identify the
Device class and Device properties (separating each field with a tab).
To set vcom type Devices (Vaisala Veriteq Devices), define the COM
port number to which your Device is connected. For example:
vcom com_port=101
vcom com_port=102
vcom com_port=103
To set HMT330 type Devices (300 Series Transmitters), define the
following:
•
sample_rate = the internal sample rate of the Device
•
timeout = the timeout for communication events
•
connection = the type of connection, COM port or TCP
•
com_port = a COM port number to which your Device is con-
nected (values for COM port connections are user-defined)
•
serialno = the serial number of your Device
•
udp_port = UDP port number (i.e. for HMT140 Devices)
•
ip_port = the TCP port (values for TCP connections, ip_
address and ip_port, are user-defined)