Vaisala viewLinc 4.3 - Manual (Page 24)

Configuring Devices
16 4 | 4 M211679EN-A
5 Disconnect the configuration cable from the Device, wait 8
seconds, then press the SERVICE button.
If you have a combination of Devices and set up configurations, your
network may look similar to this combination diagram:
Configuring Devices
Once your Devices are installed, you are ready to configure your
Devices with vLog software, or, if you are using wireless Devices,
HMT140 Utility software. These software programs allow you to
confirm the successful installation of the port and change Device
settings as required (depending on your Device).
Refer to your specific Vaisala Device User Guides for installation and
configuration instructions.
Configuration activities include:
• set sample intervals