Vaisala viewLinc 4.3 - Manual (Page 128)

Viewing and Acknowledging Alarms
120 4 | 4 M211679EN-A
4 Click Acknowledge. Your comments and actions are added to
the Event log and the Acknowledge Alarm window closes. Loca-
tions are updated with this change in status.
To acknowledge all inactive alarms:
1 On the viewLinc desktop, select Options | Alarms.
2 Select Options | Acknowledge All “Off” Alarms. Multiple Loca-
tion selection is not required.
Note: The acknowledgement column reads, Not required, for
all active alarms that do not require acknowledgement.
Inactive alarms (the alarm condition is no longer
present) that were not acknowledged, will read Off.
3 In the Acknowledge All “Off” Alarms window, indicate any
action taken, select a preconfigured comment, if available, or
enter any additional comments about why you are acknow-
ledging an ‘Off’ alarm.
4 Click Acknowledge.
To acknowledge an alarm from a Pop-up Trend graph:
1 With the Pop-up Trend window open, click the Location
Alarms
tab.
2 Select the active alarm, then right-click to select . The
Acknowledge Alarm window appears, prompting you to enter
the actions taken and comments.
3 Click Acknowledge.