Vaisala viewLinc 4.3 User Manual
Page 61
Templates
viewLinc 4.3
4
|
4
53
type of alarm (using the AlarmMessage macro - see “Email &
SMS Templates” on page 49).
•
Delay Before Activating Alarm (HH:MM):
If desired, specify
a delay period, in hours and/or minutes, from when a con-
dition exists and you want the alarm triggered.
•
Notification delays are also set on the Notification tab. If you
enter a time delay on the General Parameters tab, ensure the
combined time delay does not interrupt your alarm noti-
fication requirements.
•
Acknowledgement Required:
Select this option if you
require an individual to acknowledge an alarm (by responding
to an acknowledgement request appearing on the viewLinc
screen, remote display, in an Email or SMS text). If you select
this option, the alarm will remain active until it is acknow-
ledged. If the alarm condition is no longer present, the unac-
knowledged alarm notification remains in the Alarms window.
4
To make an alarm notification open in a pop-up window on a User’s
viewLinc desktop or remote display, click the Notifications tab, then
click
Add
, then select Add Pop-up Notification. Complete the fol-
lowing field:
Delay before popping up:
Indicate a delay, in hours and/or
minutes (HH:MM), before you want the pop-up to display. This
delay starts after the delay on the General tab finishes (if one is spe-
cified).
Note: We recommend that you use this feature sparingly. If many
pop-ups are triggered at the same time, it can disrupt your
browser operation and you may need to restart your
browser.
5
To send an alarm notification by Email, on the Notifications
tab
click
Add
, and then select
Add Email Notification
. Complete
the following fields:
Delay
before sending first notification: Indicate a delay, in hours
and/or
minutes (HH:MM), before you want the first Email sent. If
you
specified an alarm trigger delay on the General tab, ensure the