Vaisala viewLinc 4.3 - Manual (Page 109)

Viewing Devices and Hosts
viewLinc 4.3 4 | 4 101
For HMT140 Wi-Fi Loggers (with HMP110 Probes):
• Decimal Places : Enter the number of decimal places to dis-
play.
• Refer to the Vaisala Wi-Fi Data Logger HMT140 User Guide
to modify the calibration settings:
• Presentation Scale/Offset : The final scaling
(x = Scale* V + Offset).
• Engineering Scale/Offset : The intermediate scaling
(x = Scale* V + Offset)
• Calibration Scale/Offset : The primary calibration scaling
(x = Scale* V + Offset)
• High/Low Alarm Value : High and Low range alarm values
that initiate a data transmission.
• High/Low Alarm Time : High and Low alarm time specifies
the number of seconds the probe is in alarm state before
transmitting a beacon. The default setting, 255, disables the
transmission.