7 detailed description of commands, 1 frequency subsystem – Anritsu MG3641A User Manual
Page 134
SECTION 6 GPIB
6-28
6.7
Detailed Description of Commands
6.7.1
Frequency subsystem
:FREQuency[ :CW] <Numeric> <Freq term> or <Character>
Function
Sets the carrier frequency.
Parameter
<Numeric> = 0 Hz to 1040 MHz (MG3641A)
0 Hz to 2080 MHz (MG3642A)
<Character> = UP
DOWN
Unit
<Freq term>
(UP,DOWN:<Non term>)
Restriction
None
:FREQuency[ :CW]?
Function
Reads out the carrier frequency.
Response
Carrier frequency
Restriction
None
:FREQuency[ :CW]:STEP[ :INCRement] <Numeric> <Freq term>
Function
Sets the frequency step value.
Parameter
<Numeric> = 0 Hz to 1040 MHz (MG3641A)
0 Hz to 2080 MHz (MG3642A)
Unit
<Freq term>
Restriction
None
:FREQuency[ :CW]:STEP[ :INCRement]?
Function
Reads out the frequency step value.
Response
Frequency step value
Restriction
None
:FREQuency:RELative <Boolean>
Function
Turns ON or OFF the relative frequency display mode.
Parameter
<Boolean> = ON or 1
OFF or 0
Unit
<Non term>
Restriction
None
:FREQuency:RELative?
Function
Reads out the state of relative frequency display mode.
Response
Relative frequency display mode = OFF
ON
Restriction
None
:FREQuency:OFFSet <Numeric> <Freq term>
Function
Sets the frequency offset value.
Parameter
<Numeric> = –7 GHz to 7 GHz
Unit
<Freq term>
Restriction
None