Anritsu MG3641A - Manual (Page 146)

SECTION 6 GPIB
6-40
:FM:FM2[ :DEViation] <Numeric> <Freq term> or <Character>
Function Sets the FM2 deviation.
Parameter <Numeric> = –1024 kHz to 1024 kHz (MG3641A)
–2048 kHz to 2048 kHz (MG3642A)
<Character> = UP
DOWN
Unit <Freq term>
(UP,DOWN<Non Term>)
Restriction Modulation source porality can be changed by entering negative FM2 deviation value.
:FM:FM2[ :DEViation]?
Function Reads out the FM2 deviation.
Response FM2 deviation
Restriction None
:FM:FM2:STATe <Boolean>
Function Turns ON or OFF the FM2.
Parameter <Boolean> = ON or 1
OFF or 0
Unit <Non term>
Restriction None
:FM:FM2:STATe?
Function Reads out the state of FM2.
Response FM2 = OFF
ON
Restriction None
:FM:FM2:SOURce <Character>
Function Selects the FM2 modulation source.
Parameter <Character> = INT1
INT2
INT3
EXT1
EXT2
Unit <Non term>
Restriction None
:FM:FM2:SOURce?
Function Reads out the FM2 modulation source.
Response FM2 modulation source = INT1
INT2
INT3
EXT1
EXT2
Restriction None