Anritsu MG3641A User Manual

Page 28

Advertising
background image

SECTION 1 GENERAL

1-10

Other functions Relative value display

Carrier frequency and output level

Offset display

Carrier frequency and output level

Memory

1000 panel setting conditions can be stored and recalled.
Recall mode: All panel settings, Frequency only, Frequency and Level.

Trigger function

An external trigger signal (input from the BNC connector on the rear
panel, TTL level) can be used to execute a pre-programmed operation
sequence (except for operation of the power switch, Preset key, Local
key, and rotary knob).

Max. number of sequence steps of trigger program: 20 steps

Backup

When switched on, the generator restores the same setting conditions
that existed immediately before it was last powered off.
However, the following are not restored:
• Data which was in the middle of entry
• Remote status
• Data which was in the middle of GPIB transfer
• Operating status of RPP

GPIB

Can control all functions, except for pre-programmed operations
controlled by the trigger function, and operation of the power switch,
Local key, rotary knob, and knob resolution set keys.
Interface: SH1, AH1, T5, L3, TE0, SR1, RL1, PP0, DC1, DT1, C0,
E2

Reverse power

Maximum reverse input

50 W (

≤1040 MHz), 25 W (1040 to 2080 MHz, MG3642A only)

protection

power

±50 Vac

General

Power

Voltage: *Vac (Up to max. 250 V)
Frequency: 47.5 to 63 Hz, 380 to 420 Hz
Capacity: 200 VAmax

Environmental performance

Working temperature range: 0 to 50

°C

Storage temperature range: –30 to 71

°C

Conducted disturbance:

EN 61326-1: 2006 (Class A)

Radiated disturbance:

EN 61326-1: 2006 (Class A)

Harmonic Current Emission:

EN 61000-3-2: 2006 (Class A)

Electrostatic Discharge:

EN 61326-1: 2006 (Table 2)

Electromagnetic Field Immunity:

EN 61326-1: 2006 (Table 2)

Fast Transient / Burst:

EN 61326-1: 2006 (Table 2)

Surge:

EN 61326-1: 2006 (Table 2)

Conducted RF:

EN 61326-1: 2006 (Table 2)

Power Frequency Magnetic Field: EN 61326-1: 2006 (Table 2)
Voltage Dips / Short Interruptions: EN 61326-1: 2006 (Table 2)

Dimensions and mass

177 H

×320 W×451 Dmm, ≤20 kg

* Please specify a nominal voltage in the range from 100 and 240 V when ordering the product.

1-10

Specifications (continued)

Advertising
This manual is related to the following products: