Anritsu MG3641A - Manual (Page 75)

SECTION 4 OPERATING INSTRUCTIONS
4.10 Sweep Functions
4.10.1 Outline of Sweep Functions
This signal generator performs sweep with respect to the frequencies, output levels, and memories. Each sweep has
the following sweeping patterns:
You execute sweep after selecting a sweep pattern and setting sweep parameters. All the sweep functions can be set
through the "Sweep" menu.
Frequency sweep
Output level sweep
Memory sweep
AUTO
SINGLE
MANUAL ...
...
... Sweeps repetitively from sweep start point to sweep end point.
Sweeps just once from sweep start point to sweep end point.
Sweep is activated manually via the rotary knob, in accordance with a
sweep pattern.
Start frequency/stop frequency
Center frequency/span frequency
Start level/stop level
Center level/span level
Start address/stop address
Linear, number of points specified
Linear, step size specified
Log, multiplying factor fixed at 1 %
Linear, number of points specified
Linear, step size specified
Number of points specified
Step size specified
Number of points specified
Step size specified
Moreover, this unit provides 3 different sweep modes, as follows:
Sweeps with a number of points of
frequency to be swept specified.
Sweeps with a step size of
frequency to be swept specified.
Sweeps with a start frequency
continuously multiplied by 1.10.
Sweeps with a number of points of
frequency to be swept specified.
Sweeps with a step size of
frequency to be swept specified.
Sweeps with a number of points of
level to be swept specified.
Sweeps with a step size of level
to be swept specified.
Sweeps with a number of points of
level to be swept specified.
Sweeps with a step size of level
to be swept specified.
Sweeps with a sweep start frequency
and a sweep end frequency specified.
Sweeps with a center frequency
and a width of frequencies to be
swept specified.
Sweeps with a sweep start level
and a sweep end level specified.
Sweeps with a center level and
a width of levels to be swept
specified.
Performs recall successively with
a sweep start address and a sweep
end address specified.