Anritsu MG3641A - Manual (Page 186)

SECTION 9 STORAGE AND TRANSPORTATION
9-2
9.2.2 Recommended storage conditions
In addition to meeting the conditions listed in paragraph 6.2.1, the MG3641A/MG3642A should preferably be
stored where:
1. Temperature is 0
° to 30°C
2. Humidity is 40 % to 80 %
3. Temperature and humidity are stable
Before using the MG3641A/MG3642A after storage, check the performance.
9.3 Repacking and Transportation
When transporting the MG3641A/MG3642A over long distances, observe the precautions described below.
9.3.1 Repacking
Use the original packing materials. If the original packing materials were thrown away or destroyed, repack the
MG3641A/MG3642A as follows:
1. Install the protective covers over the front and rear panels.
2. Wrap the MG3641A/MG3642A in plastic or similar material.
3. Obtain a cardboard, wood, or aluminum box 10 to 15 cm larger than the MG3641A/MG3642A on all sides.
4. Put the MG3641A/MG3642A in the center of the box and fill the surrounding space with shock absorbent material.
5. Secure the box with twine, tape, or bands.
Note : It is easy to repack the MG3641A/MG3642A if the original packing materials are saved.
9.3.2 Transportation
Transport the MG3641A/MG3642A under the storage conditions recommended in paragraph 9.2.2.