Anritsu MG3641A - Manual (Page 45)

SECTION 4 OPERATING INSTRUCTIONS
4.2 Explanation of Screens
This signal generator is equipped with a multi-menu display for indicating statuses and setting operations, except for
the major items, such as frequency, output level, memory, etc.
(1) Screen Layout
(2) Functions of Function Keys
The function keys have the following operational functions:
Sel .................. Used when the currently highlighted parameter is a selection item. Each press to this key displays
selection items successively.
↓, → ............... Keys to select a parameter to be set.
By pressing these keys, you move the highlighted item in the direction of arrows.
Src .................. A key to move to the menu of the next layer. (“Src” indicates a menu name.)
Rtn .................. Return key to go back to the menu of the immediately higher layer.
Displays the menu currently
open.
Area for status display and
setting operations.
A parameter can be set or a
status selected at the location
where the characters are
highlighted.
Error message area. Indicates
details of an operation error or
other errors.
Function keys corresponding
to the key menu shown on the
display Key to turn the page when a
menu of the same layer goes
over to multiple pages.
Ω