Anritsu MG3641A - Manual (Page 46)

SECTION 4 OPERATING INSTRUCTIONS
4.3 Initial Settings
You can return the panel settings of the MG3641A/MG3642A to the initial setting conditions by pressing the [Preset]
key.
The term "Initial Settings" as used herein refers to the conditions under which the signal generator was shipped out of
the factory (Appendix A). However, if you alter the contents of the preset memory, you will be able to restore your
desired initial conditions from any current panel settings.
To alter the preset memory contents, first set up conditions you want to use as initial settings, and then follow the
procedure detailed below:
(1) Press the "Sys" [F3] key in the top menu to open the
"System (1)" menu.
1
[Preset] key
MG3641A/MG3642A front panel