Anritsu MG3641A - Manual (Page 73)

SECTION 4 OPERATING INSTRUCTIONS
4.9.4 Clearing the Memory
To clear memory contents, follow the keystrokes shown below:
[Shift] key, [Memory] (Memory Set) key, number keys, [Hz/
µV] (Clear) key
Address
Or, to clear memories at continuous addresses in one shot, operate the keys as follows:
[Shift] key, [Memory] (Memory Set) key, number keys, [·] key, number keys, [Hz/
µV] (Clear) key
Enter an address in not more than 3 digits. Address 001 may be entered in either of the following forms: [0][0][1],
[0][1] or [1].
[Memory]
(Memory Set) key
MG3641A/MG3642A front panel
[Shift] key
Smallest
address of the
memory to be
cleared Largest
address of the
memory to be
cleared