Anritsu MG3641A - Manual (Page 76)

SECTION 4 OPERATING INSTRUCTIONS
4.10.2 Setting and Executing the Sweep
In the first place, you select a sweep pattern by following the procedure detailed below:
(1) Press the "Swp" [F2] key in the top menu to open the
"Sweep" menu.
(2) Press the "Sel" [F1] key to select the sweep pattern
menu.
The menus will open in the following order:
Frequency sweep (Start/Stop)
Frequency sweep (Center/Span)
Level sweep (Start/Stop)
Level sweep (Center/Span)
Memory sweep
↑
↑
↑
↑
1
2
2