Campbell Scientific CR5000 Measurement and Control Module - Manual (Page 47)

Section 2. Data Storage and Retrieval
2-7
2.3.3 Logger Files Retrieve
Logger Files under the PC9000 tools menu allows the user to check the
programs stored in CPU Flash memory and the files stored on the PCMCIA
cards. Any of the files shown in logger files can be copied to the computer by
highlighting the file and pressing the retrieve button. Data files in the CR5000
CPU and Flash memory are not shown.
The retrieved data file is stored on the computer in the same form that it was
stored on the PC card (TOB2). This format generally needs to be converted to
another format for analysis (Section 2.3.4)
FIGURE 2.3-2. Logger Files Dialog Box
2.3.4 Via PCMCIA PC Card
When the CR5000 is used without a computer in the field, or large data files
are collected on a PC card, the PC card can be transported to the computer
with the data on it.
2.3.4.1 Inserting a PC Card
A card inserted in the PCMCIA slot when no program is running or when a
program is running that does not use the PC card does not cause a response