AMX Modero CV7 - Manual (Page 104)

Firmware Pages and Descriptions
92 7" Modero Touch Panels
Time & Date Setup Page
The Time & Date Setup page (FIG. 86) allows you to alter/set the time and date information on
the NetLinx Master. If either the Time/Date is modified on this page (then updated to the Master by
pressing the Set Time button), all devices communicating to that target Master will then be updated to
reflect the new information.
Panel Information Page Elements (Cont.)
Setup Port: Displays the setup port information/value being used by the panel.
High Port: Displays the high port (port count) value for the panel.
High Address: Displays the high address (address count) value for the panel.
High Channel: Displays the high channel (channel count) value for the panel.
High Level: Displays the high level (level count) value being used by the panel.
Serial Number: Displays the specific serial number value assigned to the panel.
Setup Pages Version: Displays the type and version of the Setup pages being used by the panel.
Screen Width: Displays the pixel width being used to display the incoming video signal on the
Modero panel.
• Maximum available screen width on a CV7 Modero panel is 800 pixels.
Screen Height: Displays the pixel height being used to display the incoming video signal on the
Modero panel.
• Maximum available screen height on a CV7 Modero panel is 480 pixels.
Screen Refresh Rate: Displays the video refresh rate applied to the incoming video signal from the
panel. Default rate is 60.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
Power Up Pages: Displays the first touch panel page assigned for display after the device is
powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String: Displays the start-up string.
Wake Up String: Displays the wake up string used after an activation from a timeout.
Sleep String: Displays the sleep string used during a panel’s sleep mode.
File System: Displays the amount of Compact Flash memory available on the Modero panel.
RAM: Displays the available RAM (or Extended Memory module) on the Modero
panel.
FIG. 86 Time and Date Setup page
Time Display
fields
Date Display
fields
Currently
selected