AMX Modero CV7 - Manual (Page 120)

Firmware Pages and Descriptions
108 7" Modero Touch Panels
Refer to the Configuring a Wireless Connection section on page 57 for more detailed information of
setting up the MVP panel for wireless network access using the different types of security options.
The elements of the Wireless Settings page are described in the table below:
Wireless Security Support
802.11b Wi-Fi CF card: • Open (Clear Text)
• Static WEP (64-bit and 128-bit key lengths)
Note: The WAP Site survey feature is disabled and is only supported by the
newer 802.11g card.
802.11g Wi-Fi CF card: • Open (Clear Text)
• Static WEP (64-bit and 128-bit key lengths)
• WPA-PSK
• EAP security (with and without certificates)
• WAP SIte Survey
FIG. 100 Wireless Settings page (reads from and assigns values to the WAP)
Wireless Settings Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
IP Settings section
Wireless Settings section
Red fields are user-editable
Blue fields cycle through choices
Grey fields are read-only