Bct ^bdo ^bfb – AMX Modero CV7 User Manual

Page 158

Advertising
background image

Programming

146

7" Modero Touch Panels

"^" Button Commands (Cont.)

^BCT

Set the text color
to the specified
color.

Only if the specified text color is not the same as the current color.

Note: Color can be assigned by color name (without spaces), number or R,G,B value
(RRGGBB or RRGGBBAA).

Syntax:

"'^BCT-<vt addr range>,<button states range>,<color value>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).

color value = Refer to theRGB Values for all 88 Basic Colors table on page 139 for more
information.

Example:

SEND_COMMAND Panel,"'^BCT-500.504&510,1,12'"

Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color
name, R,G,B,alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB).

^BDO

Set the button
draw order.

Determines what order each layer of the button is drawn.

Syntax:

"'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1-

5><1-5>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).

layer assignments = Fill Layer = 1
Image Layer = 2
Icon Layer = 3
Text Layer = 4
Border Layer = 5
Note: The layer assignments are from bottom to top. The default draw order is 12345.

Example:

SEND_COMMAND Panel,"'^BDO-530,1&2,51432'"

Sets the button’s variable text 530 ON/OFF state draw order (from bottom to top) to
Border, Fill, Text, Icon, and Image.

Example 2:

SEND_COMMAND Panel,"'^BDO-1,0,12345'"

Sets all states of a button back to its default drawing order.

^BFB

Set the feedback
type of the button.

ONLY works on General-type buttons.

Syntax:

"'^BFB-<vt addr range>,<feedback type>'"

Variable:

variable text address range = 1 - 4000.

feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).

Example:

SEND_COMMAND Panel,"'^BFB-500,Momentary'"

Sets the Feedback type of the button to 'Momentary'.

Advertising