AMX Modero CV7 - Manual (Page 26)

CV7 Touch Panel Accessories
14 7" Modero Touch Panels
NXA-WC80211GCF 802.11g Wireless Card (FG2255-07)
These panels can also connect to a wireless network using the (optional) 802.11g Wi-Fi CF card. This internal
WIC (FIG. 15) can be purchased separately as a Wi-Fi upgrade kit from AMX.
This interface card (FG2255-07) is a 2.4 GHz Wi-Fi LAN CF Card which upgrades a Modero panel’s wireless
RF capabilities from 802.11b to 802.11g. This card also provides the end-user with several new methods of
wireless encryption and data security such as WPA and WPA2. In addition to being backwards compatible
with 802.11b networks, this card is installable within all current MVP, CV7, and CV10 panels. To fully utilize
these newer wireless security features, this card must be used in tandem with the latest Modero firmware
upgrade available at www.amx.com.
This card works with compatible 802.11b/g Wireless Access Points such as the NXA-WAP200G (which uses a
default SSID of AMX). Please follow your particular Wireless Access Point’s instruction manual for the correct
procedures to setup either a secured or unsecured connection. The following table lists the specifications for
the NXA-WC80211GCF.
This upgrade kit requires that pre-existing panels first be removed from their current location (surface, wall or
docking station) before an installer can access the internal circuit boards and upgrade a
pre-existing 802.11b wireless CF card.
Only MVP panels require the use of a cardboard cutout (Mounting Template) to properly position the metal
antenna plate onto the inner surface of the unit’s rear plastic housing
802.11b Wireless Interface Card Specifications (Cont.)
Operating Environment: • Temperature: 0°C ~ 70°C (non-operating) and -15 ~ 80°C (storage)
• Humidity (non-condensing): 5% ~ 95% RH
Power Consumption: • TX power consumption: < 265 mA
• RX power consumption: < 165 mA
• Sleep Mode: 2 mA - 15 mA
Radio Data Rate: • 1Mbps, 2Mbps, 5.5Mbps, 11Mbps, Auto Rate
Receive Sensitivity: • @PER < 8%
11 Mbps: -83 dBm (max)
5.5 Mbps: -86 dBm (max)
2 Mbps: -89 dBm (max)
1 Mbps: -92 dBm (max)
RF Output Power: • 15 dBm +/- 1 dBm
• Channels 1 - 11 (North America)
Security: • WEP 64,128 bit, WPA/TKIP
Wireless Restrictions: • In R&TTE countries, such as France, the 802.11g frequency band is restricted to
2454 - 2483.5 MHz (2.4 - 2.4835 GHz) and a max power output of
100 mW EIRP outdoor.
It is recommended that any upgrade of internal equipment be done simultaneously in
order to reduce the risk of damage to internal components.
FIG. 15 NXA-WC80211GCF 802.11g wireless card
PIFA antenna
with metal plate