AMX Modero CV7 - Manual (Page 27)

CV7 Touch Panel Accessories
15 7" Modero Touch Panels
CV7 and CV10 panels only require locating the Compact Flash’s metal cover plate on the main circuit board
and then adhering the terminal antenna connector to that location using the included double-sided adhesive
tape.
The procedures for upgrading a CF card on an MVP is identical for both MVP-7500 and MVP-8400 panels.
The procedures for upgrading/installing the new CF card are also similar across all referenced NXT panels and
NXD panels as a group (differences arise from their housing).
If the CF metal cover plate is not present over the wireless card slot on a CV7 or
CV10 panel, you can use the adhesive tape to secure the terminal antenna to the
surface of the new card (atop the product label).
NXA-WC80211GCF Specifications
Dimensions (HWD): • 0.22" x 1.68" x 2.40" (5.6 mm x 42.80 mm x 61.0 mm)
Weight: • 19.50 grams (0.043 lbs)
Description: • Wireless LAN Compact Flash Card with external PIFA antenna.
• Features enterprise-class security such as WPA and WPA2 security.
Features: • Compact Flash Type I form factor
• Enhanced range and throughput
• Features wireless security such as: WPA, WPA2 and WEP
• Field-installable
• Incorporates DSSS and OFDM radio technology
• Operates at ISM frequency bands of 2.4 GHz, while providing data transfer
speeds of up to 54Mbps.
• Support for IEEE 802.11b and 802.11g
• Supports Advanced Encryption Standard (AES) 64-bit and 128-bit data
encryption, along with an Re4 encryption cipher (64/128-bit)
• Supports authentication methods such as: EAP-FAST, EAP-LEAP, EAP-PEAP,
EAP-TLS, and EAP-TTLS
• Supports Wired Equivalent Privacy (WEP) 64-bit and 128-bit data encryption
(known to the on-board firmware as Static WEP)
Antenna Type: • External PIFA antenna (factory-installed)
Bus Interface: • Compact Flash Type I
Certifications: • FCC Part 15 Class B, CE, IC, TELEC, and Wi-Fi
Media Access Control
Techniques: • Using 802.11b DSSS communication:
DBPSK @ 1 Mbps
DQPSK @ 2 Mbps
CCK @ 5.5 Mbps
• Using 802.11g OFDM communication:
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps
Network Architecture: • Infrastructure mode (Client-to-Access Point)
Operating Channels: • Using 802.11b & g communication:
04: (Ch 10 - 13) - France
11: (Ch 1 - 11) - North America
13: (Ch 1 - 13) - Europe ETSI
13: (Ch 1 - 13) - Japan (802.11g)
14: (Ch 1 - 14) - Japan (802.11b)
Note: To alter the card’s default country code (North America), please
contact an AMX Technical Support representative for detailed procedures and
information.