ATEN Altuscn Matrix KVM Switch KM0532 User Manual
Page 113
Chapter 10. Maintenance
101
4. Click Yes to continue. After a short while, the Firmware Upgrade page
comes up:
All the stations, consoles and KVM adapters that are capable of being
upgraded are listed.
Note: Only online stations and consoles, as well as KVM adapters
connected to online devices show up in the list. Offline stations and
consoles, as well as adapters connected to offline devices do not get
upgraded.
5. Make sure there is a check in the checkbox in front of the modules you
want to upgrade. Uncheck the modules that you do not want to upgrade.
6. Click Browse. Navigate to the directory where the firmware upgrade file
is located and select it.
7. Enable or disable Check Firmware Version
If you enabled Check Firmware Version the current firmware level is
compared with that of the upgrade file. If the current version is equal to
or higher than the upgrade version, a popup message appears, to inform
you of the situation and stops the upgrade procedure.
If you didn't enable Check Main Firmware Version, the upgrade file is
installed without checking what its level is.