ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 36)

KM0032 / KM0532 / KM0932 User Manual
24
Cascading Other KVM Switches
To cascade KVM switches other than the KM0532 or KM0932, a KVM
adapter cable is required. The adapter cable converts the KM0532 / KM0932’s
port signals to ones appropriate for the connectors on the KVM switch that you
are cascading.
Note: Non-KM0532 / KM0932 switches do not support additional cascading.
After cascading a non-KM0532 / KM0932 KVM switch, you cannot
cascade any more KVM switches from it.
To cascade a KVM switch other than the KM0532 / KM0932:
1. Use Cat 5e cable to connect a KVM port on the KM0532 or KM0932 to a
KVM adapter cable appropriate for the KVM switch you are connecting.
(See KVM Adapter Cables, page 5for a list of KVM adapter cables and the
platforms that they support.)
2. Connect the cables on the KVM adapter cable to the console ports on the
KVM switch you are installing.
Other Cascaded KVM Switch Installation Diagram
KH1506
KA9120
by A TEN PS/2 CPU MODUL E MODEL NO. KA9120 PS/2 CPU MODUL E MODEL NO. KA9120
LINK