ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 25)

Chapter 2. Hardware Setup
13
Rack Mounting
The KM0032 / KM0532 / KM0932 can be mounted in a 19" (1U) rack. The
mounting brackets can screw into either the front or the back of the unit so that
it can attach to the front or the back of the rack.
Rack Mounting - Front
To mount the unit at the front of the rack, do the following:
1. Remove the two screws at the front of the unit, as shown in the diagram
below:
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mount kit
to screw the rack mounting brackets into the front of the unit:
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8