ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 85)

Chapter 7. User Management
73
Browser UI:
Note: Only devices that are powered on appear in the list.
4. Switches and ports are listed in the left hand column. Select the port that
you wish to configure the permissions for, then click a radio button to set
the permissions according to the information in the table, below:
Heading Description
Not
Assigned No permission setting is specifically assigned for the user.
If a user belongs to a group that has rights to the device,
however, the port will appear in the user’s Sidebar tree and
the user can access the device according to the rights that
belong to the group.
No Access No access rights - the user has no rights to view or perform
any operations on the server connected to the port. The
port does not show up in the user's Sidebar or in the list in
the main panel.
With this setting, even if a user belongs to a group that has
rights to the device, the user will still not see the device in
the Sidebar or list, and will not be able to access it.
View Only The user can only view the remote screen; he cannot
perform any operations on it.
Full Access The user can view the remote screen and can perform
operations on the remote system from his keyboard and
monitor. If this setting is enabled, the Virtual Media setting
checkbox becomes active.
Virtual
Media Click to put an X in the box to enable the user to use the
virtual media function on this port. See Vm Mount:,
page 80 for details on mounting virtual media devices.