ATEN Altuscn Matrix KVM Switch KM0532 User Manual
Page 57
Chapter 6. Device Management
45
Service Ports
As a security measure, if a firewall is being used, the super administrator needs
to specify the port numbers that the firewall will allow. Users must indicate the
port number when they log in. If an invalid port number (or no port number) is
given, the KM0032 / KM0532 / KM0932 will not be found. An explanation of
the fields is given in the table below:
Note: 1. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
2. The service ports cannot have the same value. You must set a
different value for each one.
IP Address
The KM0032 / KM0532 / KM0932 can either have its IP address assigned
dynamically (DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain IP Address
Automatically radio button.
To specify a fixed IP address, select the Set IP Address Manually radio
button and fill in the IP address with values appropriate for your network.
DNS Server
For automatic DNS Server address assignment, select the Obtain DNS
Server Address Automatically radio button.
To specify the DNS Server address manually, select the Set DNS Server
Address Manually radio button, and fill in the addresses for the Preferred
and Alternate DNS servers with values appropriate for your network.
Note: Specifying at the preferred DNS Server address is mandatory. The
alternate DNS Server address is optional.
When you have finished making your Network page settings, click Save.
Field
Explanation
HTTP
The port number for a browser login. The default is 80.
HTTPS
The port number for a secure browser login. The default is 443.