ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 66)

KM0032 / KM0532 / KM0932 User Manual
54
New System Time
Use these fields to change the switch’s time and date settings, as follows:
Š To set the switch’s time and date to match the time and date of the
computer you are logged in on, select the Synchronize with computer
time radio button.
Note: Your computer’s time and date are displayed in the fields just below
the heading. These fields are for information purposes only.
Š To set the time and date to values of your choosing, select the Set
manually radio button and key the settings into their appropriate fields
using the HH:MM:SS and YYYY-MM-DD formats.
Š To have the time automatically synchronized to a network time server,
select the Synchronize with NTP server radio button:
Š If you want to use your network’s default time server, put a check in
the Using default NTP server checkbox.
Š If you want to specify a time server, make sure that the Using default
NTP server checkbox is unchecked, then key in the IP address of the
time server of your choice in the Primary NTP Server field. If you
want to configure an alternate time server, key in the IP address of the
time server in the Alternate NTP Server field.
Time Zone
The Time Zone settings are the same as the ones described for the Console UI
on the preceding page.