ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 96)

KM0032 / KM0532 / KM0932 User Manual
84
Changing the Preference Settings
Make your settings changes according to the information given in the
following table:
Setting Function
Language Selects the language that the interface displays in. Drop down the list of
available languages to choose the one you want.
Toolbar
Hotkey Selects which Hotkey controls the Toolbar: [Scroll Lock] [Scroll Lock], or
[Ctrl] [Ctrl].
Since the Ctrl key combination may conflict with programs running on the
local client computers or servers, the default is the Scroll Lock
combination.
ID Display Selects how the Port ID is displayed: the Port Number plus the Port
Name (Port Number + Port Name); the Port Number alone (Port
Number); or the Port Name alone (port name).
The default is Port Number + Port Name.
ID Duration Determines how long a Port ID displays on the monitor after a port
change has taken place. You can choose an amount from 0–255
seconds, or check Always On.
Note: A setting of 0 (zero) has the same effect as checking Always On.
The default is 3 Seconds.
Scan
Duration Determines how long the focus dwells on each port as it cycles through
the selected ports in Scan Mode (see Auto Scanning, page 106). Key in
a value from 1–240 seconds.
The default is 5 seconds.
Screen
Blanker If there is no input from the console for the amount of time set with this
function, the screen is blanked. Key in a value from 0–30 minutes, or
check Disabled to disable this function. If you check Disabled, the screen
is never blanked.
Note: A setting of 0 (zero) has the same effect as checking Disabled.
The default is Disabled.
Logout
Timeout If there is no user input for the amount of time set with this function, the
user is automatically logged out. A login is necessary before the Matrix
KVM Switch can be accessed again. Key in a value from 0–180 minutes,
or check Disabled to disable this function. If you check Disabled, users
are never automatically logged out, no matter how much time passes.
Note: A setting of 0 (zero) has the same effect as checking Disabled.
The default is Disabled.
Broadcast
Timeout When Broadcast is Enabled (see page 87), if there is no user input for
the amount of time set here, the Broadcast function is automatically
ended. Key in a value from 0–240 seconds, or check Disabled to disable
this function. If you check Disabled, the broadcast function is never
automatically ended, no matter how much idle time passes.
Note: A setting of 0 (zero) has the same effect as checking Disabled.
The default is Disabled.