ATEN Altuscn Matrix KVM Switch KM0532 - Manual (Page 126)

KM0032 / KM0532 / KM0932 User Manual
114
Command Summary
A description of the commands supported with this function is provided in the
table below:
* Only online ports that are available to the users that are logged into the
Console Module(s) are shown with this command.
Examples of the commands are given in the sections that follow.
Command Description
SP This is the Switch Port command. It is followed by a string that
specifies which port you want to switch to (see SP, page 115 for
details).*
TK This is the Terminate KVM Session command. It is followed by
a string that specifies which port session to terminate (see TK,
page 116 for details).*
TS This is the Terminate Console Session command. It is followed
by a string that specifies which console session to terminate
(see TS, page 116 for details).
LI This is the List KVM Ports command. It is followed by the
console port number of the console whose KVM ports you wish
to list (see LI, page 117 for details).*
Note: Following the command with the word ALL, instead of the
console port number, lists the KVM ports for all available
consoles.
LU This is the List User Profile command. It is followed by the
console port number of the console whose logged in users you
wish to see. It displays the profile of the user logged into the
specified Console Module, and what the user’s status is
(Administrator, or User). (See LU, page 117 for details.)
Note: 1. Super Administrators’ user names and status level are
not displayed. NA displays, instead.
2. Following the command with the word ALL, instead of
the console port number, lists the user profiles of all
users logged into all Console Modules.
Exit Exits the terminal session.