ATEN Altuscn Matrix KVM Switch KM0532 User Manual

Page 59

Advertising
background image

Chapter 6. Device Management

47

IP Installer

The IP Installer is an external Windows-based utility for assigning IP addresses
to the KM0032 / KM0532 / KM0932. See IP Installer, page 124 for details.

Click one of the radio buttons to select Enable, View Only, or Disable for the
IP Installer utility. See IP Installer, page 124, for IP Installer details.

Note: 1. If you select View Only, you will be able to see the KM0032 /

KM0532 / KM0932 in the IP Installer’s Device List, but you will not
be able to change the IP address.

2. For security, we strongly recommend that you set this to View Only

or Disable after use.

SMTP Settings

The KM0032 / KM0532 / KM0932 can send reports from an SMTP server. To
have the KM0032 / KM0532 / KM0932 email reports from the SMTP server
to you, do the following:

1. Click to put a check in the Enable report from the following SMTP server

checkbox.

2. Key in either the domain name or the IP address of your SMTP server.

3. If your server requires authentication, click to put a check in the My server

requires authentication checkbox.

4. Key in the appropriate account information in the Account Name,

Password, and From fields.

Note: Only one email address is allowed in the From field.

5. Key in the email address (addresses) of where you want the report sent to

in the To field.

Note: If you are sending the report to more than one email address,

separate the addresses with a semicolon.

When you have finished making your ANMS page settings, click Save.

Advertising
This manual is related to the following products: